Renfert suction system – powerCAM EC

/in /by

We offer you an excellent new suction unit from Renfert – the SILENT powerCAM EC. The suction unit is connected directly to the control electronics of the machine with a new data cable and can communicate bidirectional with the machine. With this you no longer need the switching unit anymore which made it possible to switch the power supply on and off on the suction unit. Moreover, the new suction unit is distinguished by its fine filter technology. You don’t need to exchange dust bags anymore.

With the new suction unit you therefor reduce running costs and at the same time increase operating comfort.

SILENT powerCAM EC Right-open-mini Right-open-mini

Further technical highlights of the SILENT powerCAM:

  • Maximum volume flow rate of approx. 4.000 l/m (over 20 % more than the SILENT TS)
  • Maximum low pressure of 257 mbar (approx. 30 % more than by the SILENT TS)
  • low maintenance EC motor with guaranteed 5.000 operating hours
  • Dust class M filter system with automatic filter cleaning saves you cleaning tasks
  • recommended for SilaMill 5 / 5.8 and T5 and for all those who expect maximum output from their suction units.

In the scope of delivery is a data cable for the connection with the machine. As several different data cables are available, which depend on the machine types, please mention your machine type for which you want to use the suction unit when you order.

The new DentalCAM 7

/in /by

The time has come. The next generation of the manufacturing software DentalCAM is available and offers even more comfort, possibilities and fun to use. To inform you about which impacts the new software has to your internal processes, as well as answers to frequently asked questions we have issued this newsletter for you. All new features at a glance and a short video about the new Key Features you can find in the following:

The Upgrade

The DentalCAM 7 is a completely revised CAM, which is not like a free of charge Update, but requires a fee required license (except the test version).

How do you get the license?

Machines which were bought after 01.01.2017: install the installation package with the already delivered dongle. Your machine is then immediately licensed and can be used to the full extent. If your 2017 machine is not switched to the DentalCAM 7 please contact our technique hotline under +49-5321-3779-19.

Machines delivered before 2017: Please send a written order to SILADENT for the upgrade, then we will send you the license key. As soon as you have received it, you can activate the software for complete use.

Test version, 50 milling processes free of charge (without license)*

Directly after installing the DentalCAM 7 you can start 50 milling processes free of charge without further ado. After the 50 milling processes you can only use the CAM-module without temporal or functional restrictions for demonstration, training or service functions. To keep milling with the DentalCAM 7 you will need the fee required license.

* Please contact our technique hotline under +49-5321-3779-19. We will install the test version and explain the first steps into the new “CAM-world”.

How much does the DentalCAM7 cost?

For machines that have been ordered after 01.01.2017 the upgrade is free of charge. For all earlier purchased machines the new software is as a fee required update available. The net list price for the upgrade is 980 Euro. On this price we can grant you a 25% SILADENT partner discount.

What happens with the DentalCAM 6?

Until further notice we will support the DentalCAM 6 and if necessary publish bug fixes. But we will provide new features mainly for the DentalCAM 7.

Courses / trainings

In case you need additional information then provided in the dental portal or to the use of the DentalCAM7 please contact our technique hotline under +49-5321-3779-19.