Marmorock® Saphir – The new generation of super hard stones

/in /by

  • extremely hard super hard stone with a snap-set effect (long working time)
  • already after 30 min. it can be demolded and immediately processed
  • creamy flowing property with a high thixotropy and low expansion
  • extraordinary homogenous colours, scannable

Recommendation: crown and bridge models, implant models, master models with precious/non-precious alloys, control models.

SilaPart CAD – construction software for partial framework dentures

/in /by

SilaPart CAD telescopic module

Design your CAD/CAM based telescopic module, no matter if milled or printed. We show you how it works.

  • flexible construction options
  • controllable friction
  • creates open STL-File
  • less post processing due to best results

Caution: The telescopic module works only in combination with the SilaPart CAD basic software

SilaPrint 125 – The perfect 3D printer for the laboratory

/in /by

SilaPrint 125
Within a short time (approx. 1 h) you can produce up to 3 occlusal splints, drilling templates, crowns & bridges and partial denture frameworks as well.

Otoflash G171
– Flash-curing device for light-curing resins

The device can be used for the photo-polymerisation of all light-curable materials where the curing takes place at a wavelength of 280-580 nm. Ideal for end curing of 3D printed dental resins.

With its technical configuration, the Otoflash G171 enables short curing times. Compared to other methods this achieves a substantially better curing of the 3D printed materials, resulting in very good physical characteristics and reduced residual monomer content (inhibition layer).

Technical data:

  • Dimensions of polymerisation chamber: 120 x 120 x 50 mm
  • Bowls for polymerization material with UVB blocker
  • Power input: 250 watt
  • Number of light sources: 2 flashbulbs à 100 W
  • Flash frequency: 10 flashes per second
  • delivered with a protective gas appliance for N2
  • Digital timer: adjustable from 1 to 9.999 flashes
  • Dimensions: 310 x 310 x 140 mm

The introduction set:

  • 1 x SilaPrint 125
  • 1 x Otoflash G171
  • 3 Picker
  • 1 kg printing material
  • 3 teflon pans